Akrapovic Slip-On Line Instructions D'installation page 6

www.akrapovic.com
REMOVAL OF STOCK EXHAUST SYSTEM:
1. Put the motorcycle on a stand, we recommend a central racing stand. Make sure, that surface is solid and lat.
2.
Unscrew the mufler's bracket bolt and marked clamp, and carefully remove the mufler off the motorcycle (F 01).
CAUTION: be careful not to injure yourself or damage any part of the motorcycle during this procedure!
INSTALLATION OF THE AKRAPOVIČ EXHAUST SYSTEM:
1. Carefully assemble the clamp onto the mufler, slide in the link pipe, and hand tighten the clamp (F 02).
F 01
F 02
6 / 10