Step 5: Power Up The Booster & Optimize The System - Wilson Electronics weBoost Home Complete Guide D'installation

______
Step 5: Power Up The Booster
& Optimize The System
Plug the Power Supply into wall outlet then connect to end of booster
labeled " " (turn 90° to lock connector).
NOTE: We strongly recommend using a power strip with surge protection.
Can
be wall
mounted
Command
Strips
15 METERS HORIZONTAL OR 6 METERS
VERTICAL DISTANCE
Inside
Antenna
10
to power
Booster
to power
CELL PHONE SIGNAL BOOSTER
Outside
Antenna
Cell
Tower
HOME COMPLETE