Preparation - Wilson Electronics weBoost Home Complete Guide D'installation

______

Preparation

You Will Need (tools not included)
Make sure the following materials are prepared and ready for your
installation.
NOTE: These instructions will walk you through a "soft" install process to
find the optimal locations for the inside and outside antennas, then through
the process of the permanent installation.
2
1 to 2 hours
1 Person (2 people to make antenna calibration easier)
Ladder
o
Drill (if routing cable through wall)
o
2.54 - 7.62 cm diameter existing pole for mounting
o
Outside Antenna (#901117 Pole Mount can be
purchased separately if needed)
Recommended: Power Strip with surge protection
o
CELL PHONE SIGNAL BOOSTER HOME COMPLETE