Ten Haaft CARO Digital MA Manuel D'utilisation page 80

All manuals and user guides at all-guides.com
The receiver can record and playback simultaneously and independently. Only the
currently selected channel can be recorded. At the same time, either a previously
recorded program or time-shifted, the current recording can be played back.
The status of the recording or playback is indicated by one or two status bars at
E
the bottom of the screen. If neither recording nor playback is active, the status bar
indicates „LIVE". During recording the status will indicate „REC" and the elapsed
recording time. During playback the status bar will indicate „PLAY", „FF"(Fast
Forward), „FR" (Fast Rewind) or „PAUSE". This status bar shows the current position
within the recorded program in time format and by a progress bar. To the right of
the progress bar, the total time of the recording is indicated unless the system plays
back the running recording in time-shifted mode. The elapsed recording time of the
running recording is shown in the „REC" line.
Multi-channel operation
During the recording of a program, other channels transmitted on the same trans-
ponder can be directly played back without interrupting the running recording.
To view such channels while a program is being recorded, exit the PVR menu by
pressing EXIT (the recording is continued in the background) and then press LIST. A
channel list is displayed containing all channels available for selection. One restric-
tion may apply: When playing back or recording encrypted channels, the decoder
module may not be able to decode two programs at the same time. To stop the
recording in the background, reactivate the PVR menu by pressing the PVR key.
80