Channel Search - Ten Haaft CARO Digital MA Manuel D'utilisation

Channel search

The automatic search function of the receiver scans the individual satellites or,
alternatively, the DVB-T channels for new channels.
Channels already included in the channel list are automatically updated in case of
any changes. Depending on the settings in „Edit Settings , General Options", encryp-
ted channels may be ignored
When the mobile search is started, all DVB-T channels are fi rst deleted from the
channel list (yellow button).
Starting the channel search:
To start the channel search, select MENU, Main menu, channel list, then option
channel search.
Select a satellite (or DVB-T) from the list that you wish to search for new channels
and confi rm your selection with OK. Note that the antenna must be aimed at this
satellite and that a signal must be received. To receive DVB-T signals, a suitable
antenna must be connected.
Wait until the search has been completed. During the channel search, technical
details of the scanned channels and the number of channels found are displayed. A
search may well take approx. 15 minutes. After the search is completed, the chan-
nel-selection window will be displayed.
Channel-selection window:
This window shows the channel list on the left-hand side and the new channels
on the right-hand side. To switch between TV or RADIO channels, press the TV and
radio buttons.
The new channels (list on right hand) can be transferred into the channel list, using
the following menu option
Therefore please choose a channel and press the O.K. button.
Activate:
Copy above:
All manuals and user guides at all-guides.com
Activates the new channel, if possible.
Inserts the selected new channel above an existing channel
list entry. This entry and the subsequent ones will be moved
down the list to make space for the new entry.
75
E