Samsung HW-K450 Manuel D'utilisation page 10

DESCRIPTIONS
If there is more than one file on the device you are playing, and you press
Press to select TREBLE, BASS, SUB WOOFER LEVEL, AUDIO SYNC,
Then, use the ,  buttons to adjust the Treble or Bass volume from -6 ~ +6,
Press and hold the SOUND CONTROL button for about 5 seconds to adjust
the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz, 2.5KHz,
5KHz and 10KHz are selectable and each can be adjusted to a setting between
• To adjust the woofer level using the Samsung Audio Remote mobile app,
press the [, ] buttons to decrease or increase the woofer level within 3
If the Soundbar is connected to a digital TV and the video appears out of sync
with the audio, press the SOUND CONTROL button to select AUDIO SYNC to
sync the audio with the video. Use the ,  buttons to set the audio delay
between 0 ms and 300 ms. In USB mode, TV mode, and BT mode, the Audio
To control the volume of the rear speaker sound, select REAR SPEAKER in
Sound Control, and then adjust the volume between OFF-RS and ON-RS by
To control the volume of the rear level sound, select REAR LEVEL in Sound
Control, and then adjust the volume between RS -6~+6 by using the , 
• The REAR SPEAKER and the REAR LEVEL mode are only available when
Turns the Soundbar on and off.
Adjusts the volume level of the unit.
Press the p button to pause a file temporarily.
Press the p button again to play the selected file.
the [ button, the previous file is selected.
SPEAKER, or REAR LEVEL
SUB WOOFER LEVEL volume from -12, -6 ~ +6.
seconds of pressing the WOOFER button.
Sync function is not available.
using the ,  buttons.
you connect the SWA-8000S (sold separately).
Power
Volume
Play / Pause
Skip Back
SOUND CONTROL
REAR
.
-6 and +6.
buttons.
10