Samsung RF23HTEDBSR Manuel D'utilisation page 36

Masquer les pouces Voir aussi pour RF23HTEDBSR:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

How to use the Multi Supporter
1. When not in use, leave the Multi Supporter
fl ipped over as shown in the diagram.
2. Flip the Multi Supporter to position ( 1 ) to
prevent items from falling out and over.
3. Flip the Multi Supporter to position ( 2 ) to use it
as a divider.
(2)
(2)
DA68-02954B-00.indb 36
DA68-02954B-00.indb 36
(1)
(1)
English - 36
2. Tempered Glass shelves
- To remove : Hold the right shelf and remove
the fi xer from the left shelf.
Tilt up the front of the shelf in the direction
shown ( 1 ) and lift it up vertically ( 2 ). Pull the
shelf out.
- To relocate : Tilt the front of the shelf up and
guide the shelf hooks into the slots at a desired
height. Then lower the front of the shelf so that
the hooks can drop into the slots.
Join the fi xer between the left and right shelves.
(1)
(1)
(2)
(2)
CAUTION
The Tempered Glass shelves are heavy.
Use special care when removing them.
CAUTION
After sliding the foldable shelf in and folding it, the
Shelf Front can be removed for your convenience.
If you use the self without removing the Shelf Front,
be aware the Shelf Front can separate from the shelf.
3. Vegetable & Fruit Drawers
• Door Bins
Before removing the drawer, please remove door
bins fi rst as below.
2014. 5. 20.
2014. 5. 20.
4:35
4:35

Publicité

Table des Matières
loading

Table des Matières