Setup Example - Behringer MICROPHONO PP400 Mode D'emploi

• •
stereo, the other end of the audio cable must include a
¼", TRS connector
• •
mono, the other end of the audio cable must include 2 TS
connectors (one for each mono input)
SERIAL NUMBER: To register your unit, use the serial number that is
located on the bottom of the PP400.

Setup Example

The following is an example of how to set up the PP400:
TURNTABLE
Fig 2: PP400 setup example
OUTPUT
TAPE IN/STREREO
CHANNEL IN
INPUT
MICROPHONO PP400
MICROPHONO PP400
UB1204-PRO
3