Adjusting The Height Of The Headrest - Joycare JC-1210 Mode D'emploi

All manuals and user guides at all-guides.com
JC-1210/1211/1212
GB
REMOVING ThE SEAT BELTS
For children of weight groups II and III (15 kg - 36 kg), the harness must be removed and the
vehicle's seat belt must be used to attach the child.
This car seat can be used in conjunction with its own safety belt harness system for children of the
first weight group. These must be attached by the belt buckle through 3 points within the vehicle.
1. Remove the seat belt from the rear metal buckle lock, positioned on the rear backrest.
2. From the rear seat backrest extract the seat belt covers from their slots .
3. Disengage the belts from the coupling mechanism in order to extract them from the front part
of the seat.
4. Lift the coating at the base of the seat and remove the metal hook which is used to fasten part
connected to the coupling mechanism.
5. Remove the coupling mechanism from the seat base.
6. Unhook the seat belt adjustment metal buckle from the rear lock on the back, positioned on the
rear of the seat.

ADJUSTING ThE hEIGhT Of ThE hEADREST

Regularly check if the headrest is at a suitable height for your child. The height of the headrest is correct
and corresponds with the size of the baby when the child's head rests comfortably in the middle.
• To adjust the height, pull the handle behind the headrest.
Secure the car seat with the vehicle's seat belt
The 3-point belt system of the vehicle may only be used to fasten children of Groups II and III (15
kg - 36 kg).
Step 1: Place the child seat on the vehicle's seat, making sure it is firmly pressed against the backrest
of the seat.
Step 2: Place your child on the seat.
18