Joycare JC-1210 Mode D'emploi page 15

All manuals and user guides at all-guides.com
ADJUSTING ThE SEAT BELTS fOR SAfETY GROUP I
Check the height of the seat belts. Must be adjusted according to the height of the baby in one
of two positions in the back. If they do not fit properly they should be adjusted according to the
following guidelines
1. Press the button to adjust the seat belt with one hand, and then pull forward seat belts, including
covers, with the other hand in order to loosen (Fig. 1).
2. Remove the seat belt from the rear metal buckle lock, positioned on the rear backrest (fig. 2).
3. From the back of the back seat, pull the seat belt cover out from its slots and put it back in
another one of the two available slots according to the child's height (Fig. 3/4).
4. Replace the rear seat belt metal lock buckle, positioned on the rear backrest (fig. 5).
5. Pull the belt adjustment if necessary to correctly position the seat belt over the child's shoulders (fig. 6).
JC-1210/1211/1212 GB
12) Head adjustor
13) Harness
14) 3 connect bar
15) Pull strap
15