Joycare JC-1210 Mode D'emploi page 16

GB JC-1210/1211/1212
NOTE: Make sure that the child is properly secured, that the buckle is not pressing on the
child's stomach, that the harness is tight without causing discomfort and that the shoulder
pads are at the right height for the shoulders.
SEAT INSTALLATION Group I
(for children weighing from 9 kg to 18 kg)
2. Pull the car belt to 3 points (lap and diagonal) by means of the buckle, through the appropriate
slots / guides in the rear of the seat.
Make sure the car seat belts are not twisted and that they are flat.
Press the seat against the back of the car seat while you pull the car belt buckle diagonally and
abdominally in order to eliminate flexibility, insert the buckle into the car's seat belt locking
mechanism until you hear a distinct locking "click".
16
All manuals and user guides at all-guides.com
1. Position the child car seat so that it is not tilted, making sure
that the back of the seat adheres to the car seat as much as
possible
(Fig. 1).
NOTE:
The backrest of the seat must adhere to
the seat of the car, leaving as little space as
possible.