Robert Juliat ALEDIN T 630SX-CW Mode D'emploi page 23

B. Loosen quarter turn
base.
D. Make sure tower is positioned away from
the quarter turn to enable base to enter
lantern.
F. Insert Aledin into lamp housing and tighten
....
screws
•
and open the lamp
5
C. Disconnect ground wire
Remove screws
E. Re-attach ground wire „ to the Aledin.
G. Re-tighten quarter turn
- 23 -
‚
from lamp section.
ƒ
and slide out lamp section.
†.
EN