Configuration; Basic Setup; Image Settings Using The Osd Menu - BELINEA 10 30 26 Manuel De L'utilisateur

ENGLISH

CONFIGURATION

➧ Monitor setup under Windows
XP:
If using the monitor under Windows
we strongly recommend installing the Belinea settings file.
You can get this file from your Belinea dealer or download
it from the MAXDATA FTP server at ftp.maxdata.com.
Here, click the "Belinea_Treiber_Driver" directory and
download the Belinea.inf and README_Belinea.TXT files.
Follow the installation
README_Belinea.TXT file.

BASIC SETUP

➧ ➧ ➧ ➧ ➧
Shortcut for adjusting contrast and brightness .......................................................................................................
You can adjust the contrast and brightness directly by
pressing the or buttons (
the OSD menu is not displayed. To adjust the brightness
directly, press the button. To adjust the contrast directly,

IMAGE SETTINGS USING THE OSD MENU

The OSD menu appears in a window on your screen. It
allows you to select the image settings you want to
change.
Belnea
1
1
 ƒ „
Figure 4. Monitor features
12 - Belinea 10 30 26
All manuals and user guides at all-guides.com
® 9x/ME/2000 and
® 9x/ME/2000 or XP
instructions in the
in fig. 4) while
and
2
2
‚ … †
➧ ➧ ➧ ➧ ➧ Monitor setup under Windows
Under Windows ® NT 4.0 no separate setup file is required.
Select the vertical frequency and the number of colors
directly from within the "Settings"
"Display" "Settings" menu.
press the button. After the corresponding OSD menu
is displayed, press the button to increase the bright-
ness or contrast, or press the
button 1 ( in Abb. 4) to close the corresponding menu.
➧ ➧ ➧ ➧ ➧ How to open the OSD menu ....................................
1. Press the button 1 ( in figure 4) to display the OSD
menu on the screen.
2. Select the desired function icon using the buttons
and ( in figure 4, see the following
and
section "OSD Menu Icons").
3. Press the button 2 ( in figure 4) to activate the
function.
4. Enter the desired value by using the buttons
( ).
and
5. To store the setting, press the button 1 again. Repeat
steps 2-4 to make further adjustments as needed.
6. The OSD menu will automatically disappear if no
changes are made for more than 45 seconds. The
current settings will be saved. You can also close it
manually by pressing the button 1.
® NT 4.0:
"Control Panel"
button to reduce it. Press
and