AEG IDE84242IB Prescriptions De Montage Et Mode D'emploi page 57

USING THE EXTRACTOR FAN
Power-on
Press (touch) ON/OFF hob/ extractor
The indicator light will turn on to indicate that the hob/extractor
is ready for use
Press again to turn off
Note: This function has priority over the others.
Switching on the extractor fan:
Touch (press) the selector
Extraction speed (power):
touch (press) the selector
speed (power) (0-10);
touch (press) the selector
speed (power) (10-0);
•
Timer
Activation/Regulation of Timer function for the
extractor fan
• Select the extractor fan
• Press (5) to access the Timer function (from any
speed)
• Regulate the duration of the Timer:
press the selector
shut-down time
press the selector
shut-down time
the display (10) will show the countdown,
Note: on the side of the display of the extractor fan, with the
Timer in use, the following symbol will appear
When the timer has finished the countdown, there is an
acoustic signal (for 2 minutes, or it will stop when one of the
buttons on the hob is pressed) , while the display (10) will
flash, with the symbol "
to activate the extractor fan
, to increase the extraction
, to decrease the extraction
, to increase the automatic
, to decrease the automatic
(9)
".
To switch off the Timer:
• select the cooking zone
• set the value of the timer to " " , by means of
Note: the function remains active if no other key is pressed
in the meantime.
Grease Filter saturation indicator
The hood indicates when it is necessary to perform
maintenance on the filters:
LED (11) turns on
Reset of the Grease Filter saturation indicator
After performing maintenance on the filters, hold down the key
; the LED
again.
Automatic mode
The hood will turn on at the most suitable speed, adapting the
extraction capacity to the cooking level used in the cooking
zone.
To activate this function:
Briefly press , LED
that the hood is working in this mode.
57
will turn off, and the countdown will start
(11) will light up to indicate