Cd Mode - Salora Elite 1 Manuel D'utilisation

TUNER MODE
Stereo / Mono reception
If the signal from the FM stereo is weak, you can improve the sound quality by switching to mono reception.
1. Press the Stereo / Mono button to switch to mono reception.
2. To switch back to FM stereo, press the Stereo / Mono button again.
Notes:
The mono or stereo setting is also saved when you store a station as preset.
RDS station service
RDS (Radio Data System) is an information system which inaudible digital information is transmitted in
addition to the normal FM radio programme. When the device is receiving a RDS station and the recep-
tion strength is sufficient, the station name and "
before the RDS information is available.
RDS time synchronisation
Some RDS stations transmit a time signal. If reception is good, the time information will update the
time if you have selected the "CT ON" option during the time setting.
Time synchronisation can take several minutes, and even with good reception the accuracy
depends on the time signal being transmitted. The automatic time setting is always activated when
the device is switched from standby to tuner mode and receives a RDS station. When the device
is waiting for an RDS time signal, " " flashes on the display. Once RDS time synchronisation
completes, " " keeps lighting.
Calling up RDS information
1. Repeatedly press the Display button to cycle through the information.
a. Station name Displays the name of the radio station being listened to.
b. Programme type Displays the type of station being listened to, e.g. Pop, Classic, News, etc.
c. Text Displays the message about the station being listened to as ticker text.
d. Day and Time Displays the current time and day of the week.
e. Frequency Displays the waveband and the frequency of station being listened to.
Station types (PTY)
1. To call up the current station type, press the PTY button.
If no station type code is transmitted, "NO PTY" appears on the display.
2. Repeatedly press the PTY button to select the desired station type.
3. Press the Rewind or Forward button to start the station search by station type.
The search stops once a station of the selected type is found.
4. Press the PTY button to stop the search.
All manuals and user guides at all-guides.com
" appear in the display. It may take some time
11

CD MODE

The device is suitable for music CDs displaying the logo shown here (CD-DA) and for
CD-Rs and CD-RWs with audio data or MP3 and WMA formats.
In MP3/WMA mode, the terms "album" and "file" are very important. "Album" cor-
responds to a folder on a PC, "file" to a file on a PC or CD-DA track. An MP3/WMA CD
may not contain more than 511 tracks/folders in total.
When burning CD-R and CD-RWs with audio files, various problems may arise
which could lead to problems with playback. This can be caused by faulty software or
hardware settings or by the CD being used. Should such problems arise, contact the customer services
of your CD burner or software manufacturer or look for relevant information, for example on the Internet.
When you are making audio CDs, observe all legal guidelines and ensure that the copyright of third par-
ties is not fringed.
Always keep the CD compartment closed to prevent dust from collecting on the laser optics. Do not at-
tach adhesive labels to CDs. Keep the surfaces of CDs clean. You can play standard 12cm CDs as well
as 8cm CDs on the device. An adaptor is not necessary.
Selecting the CD input source
1. Press the Function button to select CD as the input source.
If there is no CD in the compartment, the display shows the message "NO DISC". Otherwise, the
device scans the CD content.
Inserting a CD
1. Open the CD compartment by pulling the top of the front panel. The display shows "OPEN".
2. Insert a CD into the CD compartment with it printing facing outward.
3. Push the front panel to its original position to close the CD compartment. The device then reads the
content of CD, and the display shows "CD READ"
- In MP3/WMA mode: The display shows the total number of albums and files, and the format "MP3/
WMA".
- In CD-DA mode: The display shows the total playing time, the total number of tracks, and the
format "CD".
CD playback
1. Press the Play/Pause button to start playback.
Playback always starts with the first track (CD-DA) or the first file of the first album (MP3/WMA).
2. Press the Play/Pause button to pause the playback.
3. Press the Play/Pause button again to resume playback.
4. Press Stop button to end the playback.
Selecting a file or track
1. During playback, repeatedly press the Rewind or Forward button until the desired file or track is
reached. Playback of the selected file/track starts automatically.
– In MP3/WMA, you also can select the album by pressing the Up or Down button.
2. You can also select the files/tracks in the stop position. Press and hold Rewind or Forward button
to select the files/tracks more quickly.
Searching for a passage within a file or track
1. During playback, press and hold down the Rewind or Forward button until you find the passage
you want to hear.
– Playback starts when you release the button.
– The volume is reduced during the search.
12