Would you like to setup the Out-Of-Band interface now? [Y/N]
y
Please enter the IP address of the device (A.B.C.D) or enter
°×DHCP°± (without the quotes) to automatically request an IP
address from the network DHCP server. [192.168.2.1]:
Please enter the IP subnet mask (A.B.C.D or /nn).
[255.255.255.0]:
This is the configuration information that has been
collected:
User Account setup = root
Password = ********
Out-of-band IP address = 192.168.2.1 255.255.255.0
Final Step:
If the information is correct, please enter (Y) to save the
configuration, and copy the settings to the start-up
configuration file. If the information is incorrect, enter
(N) to discard the configuration and restart the wizard:
[Y/N] y
Thank you for using the Dell Easy Set up Wizard. You will
now enter CLI mode.
Applying Interface configuration, please wait...
console>
224