Functional Description; Intended Use; English | 5 - Bosch GDS 24 Professional Notice Originale

Masquer les pouces Voir aussi pour GDS 24 Professional:

Notice originale (181 pages)

Notice originale (10 pages)

Notice originale (175 pages)

Table Des Matières

Table des Matières

All manuals and user guides at all-guides.com

OBJ_BUCH-550-001.book Page 5 Monday, November 12, 2007 4:54 PM

g) If devices are provided for the connection

of dust extraction and collection facili-

ties, ensure these are connected and

properly used. Use of dust collection can

reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the cor-

rect power tool for your application. The

correct power tool will do the job better

and safer at the rate for which it is de-

signed.

b) Do not use the power tool if the switch

does not turn it on or off. Any power tool

that cannot be controlled with the switch

is dangerous and must be repaired.

c) Disconnect the plug from the power

source and/or the battery pack from the

power tool before making any adjust-

ments, changing accessories, or storing

power tools. Such preventive safety mea-

sures reduce the risk of starting the power

tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfa-

miliar with the power tool or these in-

structions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for misalign-

ment or binding of moving parts, break-

age of parts and any other condition that

may affect the power tool's operation. If

damaged, have the power tool repaired

before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Prop-

erly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories, tool bits

etc. in accordance with these instruc-

tions, taking into account the working

conditions and the work to be performed.

Use of the power tool for operations differ-

ent from those intended could result in a

hazardous situation.

Bosch Power Tools

5) Service

a) Have your power tool serviced by a quali-

fied repair person using only identical re-

placement parts. This will ensure that the

safety of the power tool is maintained.

Power Tool-specific Safety

Warnings

Do not use the power tool with a damaged

cord. Do not touch the damaged cord and

pull the plug from the outlet when the cord

is damaged while working. Damaged cords

increase the risk of an electric shock.

When working with the power tool, always

hold it firmly with both hands and provide

for a secure stance. The power tool is guided

more secure with both hands.

Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more

secure than by hand.

Always wait until the power tool has come to

a complete stop before placing it down. The

tool insert can jam and lead to loss of control

over the power tool.