GE JCK1000 Installation page 9

Installation Instructions
Securing the Oven in the Opening
C
Sliding the Oven Into the
C1
Opening
•
side edges.
Drilling the Pilot Holes and
C2
Mounting the Oven
NOTE: Before drilling the pilot holes, make
-
sure the oven is pushed as far back into
the opening as it will go and is centered.
provided.
Mounting
Hole Loca-
tions (Hole
Locations
may vary)
WARNING:
must be used. Failure to do so could
result in the oven falling out of the
cabinet, causing serious injury.
vided.
NOTE:
The screws must be
a minimum of 6 mm
(1/4") from the front
of the cutout.
Mounting screws
-