Lincar Monellina Manuel D'instructions Et D'entretien page 49

ORDINARY COMBUSTION ROOM CLEANING
The combustion room is to clean periodic to keep a good functioning. We recommend
•
one a month but it depends on operating day time of stove, quality pellet etc. This
operation is to do by qualify staff
Combustion Room Cleaning (fig. 5 – 6):
•
Before starting the cleaning , please would You check if You have the spare part for
−
the seal;
Take away : head and tank cover (fig. 5);
−
Unscrew the two nuts and take away the head protection, Unscrew the last four nuts
−
and take away the cap of closing room (fig. 6);
To clean with the appropriate brush the space between tubes of heat exchange also
−
with a vacuum cleaner;
Replace everything with attention to the seal gasket position (to substitute if
−
necessary) and the sheet must be replaced with the fold on top as showed in the dart.
IT IT IT IT- - - - GB GB- - - - FR FR- - - - ES ES mod. 156P PLUS - 176PL PLUS 2018
GB GB FR FR ES ES
Fig. 5
Fig. 6
A
A
49/108
Combustion
•
Cleaning (fig. 7):
Unscrew the dowel M.5
−
"A" who fixed the fire
door.
Take away the fire door
−
with attention to ceramic
parts.
Unscrew the four dowels
−
and take away the cap.
Clean with a vacuum
−
cleaner.
Replace everything with
−
attention to ceramic parts
Room