How To Use The Remote Control; Using The Remote Control - Samsung HW-M4500 Manuel

Masquer les pouces Voir aussi pour HW-M4500:

Table des Matières

Les langues disponibles

How to Use the Remote Control

Turns the Soundbar on and off.

You can select from TREBLE, BASS, or AUDIO

• To control the volume of the treble or bass

Sound Control

sound, select TREBLE or BASS in Sound

Settings, and then adjust the volume

between -6~+6 by using the Up/Down

• Press and hold the

button for about 5 seconds to adjust the

sound for each frequency band. 150Hz,

300Hz, 600Hz, 1.2KHz, 2.5KHz, 5KHz, and

10KHz are selectable (Left/Right) and each

can be adjusted to a setting between

-6 ~ +6 (Up/Down).

• If the video and audio between the TV and

your Soundbar are not synchronised, select

AUDIO SYNC in Sound Settings, and then

set audio delay between

0~300 milliseconds by using the Up/Down

buttons. (Except "USB" mode)

• Audio Sync is only supported in some

The Surround Sound function adds depth and a

sense of space to sound.

Each time you press this button, ON and OFF

• ON : Play sound over all the speakers.

• OFF : You can hear the sound of the original

source channel from several speakers.

(Sound Control)