Wall Mounting (Optional); Handset Overview - VTech CS6729 Mode D'emploi

Wall mounting (optional)

To mount your telephone on a wall:
. Remove the telephone line cord
from the telephone wall jack, and the
telephone base power adapter from
the electrical outlet (if necessary).
3. Route the telephone line cord
through the hole on the wall mount
bracket and plug it into the telephone
wall jack. Route the power cord out
of the telephone base and plug it into
an electrical outlet not controlled by a
wall switch.

Handset overview

1. CHARGE light
2. REDIAL/PAUSE
• Review the redial list.
• Insert a dialing pause.
3. /FLASH
• Make or answer a call.
• Answer another incoming call during
a call.
1
4.
• Set or dial your voicemail number.
5. Dialing keys
6. TONE
• Switch to tone dialing temporarily
during a call
7. MUTE/DELETE
• Mute the microphone.
• Silence the ringer temporarily while the
handset is ringing.
• Delete the displayed entry while in the
directory, caller ID log or redial list.
8. / /VOLUME
Review the directory .
•
• Increase the listening volume.
• Scroll up while in a menu, or in the
directory, caller ID log or redial list.

2
3
4
5
6
7
2. Position the telephone base against
the wall mount bracket with the
extended tabs marked B on top.
Insert the extended tabs marked B
on the wall mount bracket into the
slots marked B on the back of the
telephone base. Push the telephone
base down until it clicks securely.
4. Align the holes on the bracket with
the standard wall plate and slide the
bracket down until it locks securely.
Bundle the telephone line cord
and power adapter cord neatly
with twist ties.
8
9
0

2
9. MENU/SELECT
• Show the menu.
• Select an item, or save an entry or
setting in a menu.
10. OFF/CANCEL
• Hang up a call.
• Silence the ringer temporarily while the
handset is ringing.
• To return to the previous menu or idle
mode, without making changes.
11. CID/ /VOLUME
• Review the caller ID log.
• Decrease the listening volume.
• Scroll down while in a menu, or in the
directory, caller ID log or redial list.
#
12. QUIET
• Press and hold to set and turn on the
quiet mode, or turn it off.
• Press repeatedly to show other dialing
options when reviewing a caller ID log
entry.
4