Emptying The Debris Compartment - Bestway AQUAROVER FLOWCLEAR 58622 Manuel D'utilisation

Robot de nettoyage de piscine autonome
Masquer les pouces Voir aussi pour AQUAROVER FLOWCLEAR 58622:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT NOTE:
The swivel head may rotate repeatedly for a few minutes once the robot sinks to the pool
bottom. This phenomenon will stop once the air trapped inside the robot is gradually
discharged and the robot will begin to move regularly.
Power indicator light starts to blink when 10 minutes of usage remains.
Power indicator light :
No light - Power off / no power
Light - Power on
Blinking light - Battery power will be exhausted within 10 minutes.
NOTE:
- Refrain from making any physical contact with both water sensors.
-
4. To retrieve the robot from the pool, attach the hook to a telescopic pole (not provided)
and use it to retrieve the float, if you are unable to retrieve with your hands.
Once the robot reaches the water surface, grasp onto the grip underneath the wider end
of the robot base to lift the cleaner to drain the water out of the robot.
5. Slide the power switch OFF. Rinse the robot with fresh water after every use. DO NOT
use any detergent.
NOTE: To ensure the most efficient cleaning, when your pool is quite dirty, it is
recommended to empty the debris compartment after the first 30min of operation,
or whenever the robot's movement has slowed down noticeably. Then return the robot
(with an emptied debris compartment) to the pool, and let it run through the remaining of
its cycle.

EMPTYING THE DEBRIS COMPARTMENT

WARNING!
Using the robot without its filter cover in place will VOID your warranty.
11

Publicité

Table des Matières
loading

Table des Matières