Memphis Controller Diagram - Memphis Pro Built-In ITC 3 Instructions

Part Name
VG1966 Auger Wiring Harness
VG1967 Blower Wiring Harness
VG1968 Display Wiring Harness
VG0913(E) US Power Cable (Euro)
VG1970 IO Wiring Harness
VG1971 Probe Jack Wiring Harness
VG1972 Push Button Wiring Harness
VG1973 5V Wiring Harness
VG1975 Igniter Wiring Harness
VG1976 Auxiliary Fan Wiring Harness
VG1977 RTD Wiring Harness
VG1978 24V Wiring Harness
VG1979 Cook Light Wiring Harness
VG9012 Wifi Jack
VG0326 Logic Board
VG0327 IO Board
VG0328 Power Supply Board

Memphis Controller Diagram

Description
5 pin connector from auger motor to the logic board
4 pin connector from blower to the logic board
9 pin connector from the LCD display to the logic board
Power cable that plugs into 120VAC (US) or 240VAC (EU) wall outlet
8 pin connector from IO board to the logic board
2 pin connector from meat probe jack to the IO board
4 pin connector from push button in the Display Housing to the IO board
4 pin connector from power supply board to the logic board
2 pin connector from igniter to the logic board
2 pin connector from Aux fan to logic board
2 Pin connector from RTD to the logic board. Connection to board is non-polarized
2 pin connector from power supply to logic board. Provides power to blower, aux fan,
auger motor, cook lights and LCD
2 pin connector from cook lights to logic board
Single conductor jack installed in right panel connected to the logic board
Controls components related to smoking and cooking
Controls push button and meat probe jacks
Provides 24V DC and 5V DC power
13