Memphis Pro Built-In ITC 3 Instructions page 11

Refer to Hardware Components for item part numbers, descriptions, and quantities.
19. Inset the three ash/grease drawers back into the unit.
20. Insert the Burnpot assembly into the slot inside the grill at the bottom of the pellet chute. Place Savorizer
(item 2) onto the left and right lower brackets found inside the unit.
21. Place the main cook grates (item 1) onto the front and rear supports. Place the upper cook grate (item 1) onto
the left and right upper brackets found inside the unit.
Vent holes on the mounting brackets must remain unobstructed for proper air circulation.
Grill must be accessible (able to slide out) for any future repair or maintenance.
Refer to the Owners Guide for first time use instructions.
Installation Step 5: Final Assembly
11