Sanyo DP37647 Manuel D'instructions page 16

HELPFUL HINTS (PROBLEMS/SOLUTIONS) Continued
Please check the chart below and try the solu-
tions listed for your problem. If the problem
still persists, before returning your HDTV,
Problem: Check these Conditions:
Cannot select or
G
scan some channels
G
G
G
G
No Cable channels
G
above number 13
Remote Control
G
will not work TV
G
Afterimages (ghosts)
G
appear
16
Need help?
Visit our Web site at
Channel may be removed from memory.
Check antenna connections.
No digital signal being broadcast.
V-Guide is set to block programming.
Weak Signal.
Cable Channel Indicator C should
appear next to channel number.
Check batteries.
Check if DTV is plugged in.
Do not display the same image on
screen for a long period of time. After-
images or ghosts may appear on parts
of the panel.
This symbol on the nameplate means the product is Listed by Underwriters' Laboratories
Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire,
casualty and electrical hazards.
www.sanyoctv.com
please call us toll free at 1.800.877.5032 or
visit our website at www.sanyoctv.com.
We can Help!
Try these Solutions:
Select CH. Scan Memory and manually
G
add channels or start channel search.
Set V-Guide to "None" or press RESET
G
key to clear all settings and restart
channel search.
Turn antenna, install signal booster.
G
Switch Analog Antenna Signal Selection
G
to Cable.
Replace batteries.
G
Aim remote control at front of DTV.
G
1-800-877-5032
or Call
Page No.
13
14
11
12
5, 11