CAUTIONS
• Keep the unit at least 1 meter away from TV or radios to avoid
electromagnetic interference.
• Do not expose the unit under direct sun light to avoid surface color
fading.
• Do not tilt the unit for more than 35°or upside-down while
transporting.
• Place the unit on a flat surface with less than 5°inclination.
• The unit operates more efficiently in certain room locations (see
Technical Specifications).
• Empty the condensed drainage pan before putting the unit in
storage to prolong the unit lifetime at the end of the season.
• Do not use chemical solvents (e.g. Benzene, alcohol-glazer) to
clean the unit surface to avoid scratching, damaging the surface.
• Make sure to cut off the power before disassembling or installing
the air-inlet fence.
• The battery must be removed from the appliance before it is
scrapped .
• The plug must be removed before cleaning, maintaining or filling
the appliance.
IDENTIFICATION OF PARTS
1
Control panel
3
Signal receptor
5
Transport handle
7
Evaporator air intake
9
Power supply
INSTALLATION
Installation accessories
Air exhaust duct
1
Window exhaust adapter
3
Baffle plate
5
70
2
Cold air outlet
4
Remote controller
6
Air outlet hose
8
Secondary drain port
10
Primary drain port
2
Connector of air exhaust duct
4
Remote control
71
G