SPORTSTECH FPR300 Manuel page 31

Step 3
1. Insert the two upper cross struts between the frame rails and fasten them to the front frame, at the
top with two screws (7) and two washers and in the lower hole with two screws (5), two washers
and two nuts.
2. Now place the upper frame connector on the frame rails from behind, aligning the holes in the flat
connectors so that the three components of the upper frame connector, frame rails and upper cross
struts can be screwed together. Use two screws (9) and two washers to fix the upper hole and two
screws (8), two washers and two nuts on the lower hole.
7
7
5 5
7 (2x) (M10x65)
5 (2x) (M10x65)
9 9
7
7
5
5
31
Upper frame connector
8 8
7
7
5 5
9
8
9 (2x) (M10x70)
8 (2x) (M10x70)
9 9
8
8
EN