SoClean 2 Guide D'utilisation page 24

20 | SET LANGUAGE, CLOCK & DISINFECTING SCHEDULE
A000330-14_Rev A-SC1200 Manual_CA_0411.indd 20
Set Run Time
(in minutes)
Set Run Time
(in minutes)
Set Start Time
Set Start Time
Set Cycle Length/ Schedule
the Daily Disinfecting
These two processes follow each other in this setup.
1. Press the button.
2. Press the or button to decrease or increase
the number of minutes of your cycle time.
Note: The default run time of 7 minutes should be
sufficient to disinfect your PAP equipment.
3. Press the button again to save your cycle length
and schedule the cycle start time. To skip the start time
setup, press the button again when you reach
this step.
4. Press the or buttons to reach the desired start
time. Press the button again to save and return to the
home screen.
Note: Schedule a start time at least two hours before you
need to use the PAP machine. The entire disinfecting cycle
requires two hours plus the disinfecting time to complete.
A green indicator light means that the cycle completed.
4/11/19 1:35 PM