Vacuum Cleaner Description; Vacuum Cleaner Parts And Labels - Blastrac BDC-3155HCA Manuel D'instructions

Operating manual BDC-3155HCA

Vacuum cleaner description

Vacuum Cleaner Parts and Labels

Figure 1
1.
Identification plate which includes:
▪ Manufacturer's name and address
▪ Designation and model, including class (H)
▪ EC Mark
▪
Technical data
▪ Serial number
▪ Year of manufacture
▪ Weight (kg)
2. Class H label
3. Asbestos plate
4. Attention plate
Draws the operator's attention to the fact that the filter
must only be shaken when the vacuum cleaner is off.
Failing this, the shaking would have no effect while the
filter itself could be damaged.
5. Panel power plate
Indicates that the panel is powered by the voltage
indicated on the data plate.
6. Inlet
7. Outlet
8. On/off switch
9.
Vacuum hose
10. Closing plug
11. Longopac bag protective casing lifting handle
®
12. Vacuum gauge
13. Protective casing closing hook
The class H label reads the following.
WARNING!
This vacuum cleaner contains dust hazardous
for the health.
Only authorised personnel wearing suitable
personal protective equipment should empty
and service the vacuum cleaner, including removing
the means used to vacuum the dust. Do not use without
the complete filter system in place.
This vacuum cleaner creates a strong air flow which is drawn in
through the inlet (6, Fig. 1) and blows out through the exhaust
(7, Fig. 1). After the hose and tools have been fitted, make sure
that the motor turns correctly.
The vacuum cleaner is supplied with a check valve (Clapet)
which prevents air and materials from coming out of the dust
container, even if the electric motor rotates in the opposite
direction than the one expected.
Before turning on the vacuum cleaner, fit the vacuum hose into
the inlet and then fit the required tool on to the end part. Refer
to the manufacturer's accessory catalogue or Service Centre.
The diameters of the authorized hoses are indicated in the
Technical data table.
The vacuum cleaner is equipped with a main filter which
enables it to be used for the majority of applications.
Besides the main filter which retains the more common types
of dust, the vacuum cleaner can be fitted with an upstream
absolute filter and a downstream absolute filter, with a higher
filtering capacity for fine dust and substances harmful for the
health.
Before turning the vacuum cleaner on, fit the vacuum hose into
the inlet and then fit the required tool on to the end part. Refer
to the manufacturer's accessory catalogue or Service Centre.
After the hose and tools have been fitted, make sure that the
motor turns correctly.
This vacuum cleaner is equipped with an internal baffle
plate which subjects the vacuumed substances to a circular
centrifugal movement that makes them drop into the container.
The vacuum cleaner is equipped with a filter which enables it to
be used for the majority of applications.
5/16
info@blastrac.eu
GB