Instruction manual BDC-24-230V-P
Vacuum cleaner description
Vacuum Cleaner Parts and Labels
1.
Identification plate which includes:
Code of the Model, Technical Specifications (see table
on page 6), Serial No., Year of manufacture, Nominal
network voltage.
2.
Dust container
3.
Dust container release lever
4.
Inlet
5.
Accessories compartment
6.
Outlet
7.
Plug for connecting the vacuum cleaner to an electrical
socket.
8.
Silica Dust Warning
Draws the operator's attention to the fact that exposure
of a crystalline silicon ust can cause cancer or silicosis.
This vacuum cleaner creates a strong air flow which is drawn
in through the inlet (4 - Fig. 1) and blown out through the
outlet (6 - Fig. 1).
Before turning on the vacuum cleaner, fit the vacuum hose
into the inlet and then fit the required tool on to the end part
(refer to the manufacturer's accessory catalogue or Service
Centre).
The diameters of the authorised hoses are given in the
technical specifications table.
The vacuum cleaner is equipped with cartridge filters which
enable it to be used for the majority of applications.
I
US
Figure 1
Optional kits
Please contact the manufacturer's sales network for
information on optionals.
Instructions for installing the optional are included in the
conversion kit.
WARNING!
Use only supplied and authorized genuine spare
parts.
Accessories
Various accessories are available; refer to the manufacturer's
accessory catalogue.
WARNING!
Use only genuine accessories supplied and
authorized by the manufacturer.
Packing and unpacking
Dispose of the packing materials in compliance with the laws
in force.
Figure 2
Model
Units
A
B
C
Weight with packing
(lbs.)
Unpacking, moving, use and storage
Operate on flat, horizontal surfaces.
The load-bearing capacity of the surface the vacuum cleaner
is placed on must be suitable for bearing its weight).
www.blastrac.com ‒ info@blastrac.com
4/16
BDC-24-230V-P
in
28
53
87
311