Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SETTING COOKING END TIME / DELAYED START
The desired cooking end time can be set, delaying oven switch-on by up to a maximum of 23 hours and 59 minutes, starting
from the current time. This is possible only after a cooking duration has been set. This setting is available only if preheating
is not required for the selected function.
180°C
- 00:30
TEMPERATURE
COOK TIME
Conventional
No
19:20
Start
PREHEAT
END TIME
180°C
- 00:30
TEMPERATURE
COOK TIME
Conventional
No
20:10
Start
PREHEAT
END TIME
180°C
- 00:30
TEMPERATURE
COOK TIME
Conventional
No
20:10
Start
PREHEAT
END TIME
After setting the cooking duration, the display shows the cooking end time (for example 19:20). To delay the end of cooking,
postponing oven switch-on, proceed as follows:
1.
Turn the "Browse" knob to position the cursor at the cooking end time.
2.
Press the button
to select the parameter: the cooking end time flashes.
3.
To delay the cooking end time, turn the "Browse" knob to the desired value.
4.
Confirm the selected value by pressing the button
5.
Turn the "Browse" knob to position the cursor at START, then press the button
6.
The display indicates which level food should be placed on. Carry out the operation and press the button
cooking. The oven will start cooking after a period of time calculated so as to finish cooking at the set time (e.g. for food
requiring a cooking time of 20 minutes, if the cooking end time is set to 20:10 the oven will start cooking at 19:50).
NOTE: During the waiting stage, the cooking cycle can be started in any case by turning the "Browse" knob to position
the cursor at "Start" and then pressing the button
The set values (temperature, grill level, cooking time) can be changed at any time, as described in previous sections.
INDICATION OF RESIDUAL HEAT INSIDE THE OVEN
168°
Residual Heat
At the end of cooking, or when the oven is switched off, if the temperature inside the oven is over 50°C, the display shows the
temperature at that moment and the bar indicating cooling in progress. When the residual heat reaches 50°C, the current time
appears on the display.
TIMER
00 : 00 : 00
(HH)
(MM)
(SS)
Turn +/- to set Timer, ✓ to Start
This function can be used only with the oven switched off and is useful, for example, for controlling the cooking time of pasta.
The maximum time which can be set is 1 hour 30 minutes.
1.
With the oven switched off, press the button
2.
Turn the "Browse" knob to select the desired time.
3.
Press the button
to start the countdown. When the set time has elapsed, "00:00:00" will appear on the display and
an acoustic signal sounds. The time can now be prolonged, proceeding as described above, or the timer can be
deactivated by pressing the button
All manuals and user guides at all-guides.com
180°C
- 00:30
TEMPERATURE
COOK TIME
Conventional
No
19:20
Start
PREHEAT
END TIME
180°C
- 00:30
TEMPERATURE
COOK TIME
Conventional
No
20:10
Start
PREHEAT
END TIME
180°C
- 00:29
TEMPERATURE
COOK TIME
Conventional
No
20:10
Start
PREHEAT
END TIME
.
.
19:42
00 : 30 : 00
(HH)
(MM)
(SS)
Turn +/- to set Timer, ✓ to Start
: "00:00:00" will appear on the display.
(the current time will appear on the display).
IT29
.
01 : 09 : 00
Timer
to start
Publicité
Table des Matières
