Thermador PROFESSIONAL PRO GRAND PRG36 Manuel D'installation page 8

36" (914mm) Min
to combustible
materials
36 ¾" Max (933mm)
⅞
35 " Min (911mm)

as defined in the "National
Fuel Gas Code" (ANSI Z223.1,
Current Edition). Clearances
from non-combustible materials
are not part of the ANSI Z21.1
scope and are not certified by
CSA. Clearances of less than
12" (305 mm) must be
approved by the local codes
and/or by the local authority
having jurisdiction.
English 6
31 ¼ " (794mm)
⅛
29
" (740mm)
.
High Shelf
Low Backguard
⅛
25
maximum
recess depth
26
48 ¾" (1238mm)
36" (914mm) min
to combustible
materials
36 ¾" Max (933mm)
⅞
35 " Min (911mm)
Combustible Materials
2¾" (70m)
12" (305mm)
9"
(229mm)
" (638mm)
⅞
mm)
" (683
F 2: I C
IGURE NSTALLATION
12" (305mm) min
to combustible
surface with Flush
Island Trim
Flush Island Trim
F 3: I
IGURE NSTALLATION
1
21 " (537mm)
/
8
Combustible Back Wall
as defined in the "National Fuel Gas
Code" (ANSI Z223.1, Current Edition).
Clearances from non-combustible materi-
als are not part of the ANSI Z21.1 scope
and are not certified by CSA. Clearances
of less than 12" (305 mm) must be
approved by the local codes and/or by the
local authority having jurisdiction.
H
LEARANCES WITH IGH SHELF OR
Combustible Materials
Note: For Flush Island
Trim installations,
counter surface should
have a cantilever edge
meeting the back section
of the Flush Island Trim
accessory.
Cantilever
Note: If an inner wall is
used under the cantilever
counter top, there should
be a 1/8" (3mm) gap from
the rear of the range to the
inner wall.
C I
LEARANCES WITH NCLUDED
L B
OW ACKGUARD
F I T
LUSH SLAND RIM