Hdmi Linking; Motion Sync - Sanyo DP42849 Manuel D'instructions

HDMI LINKING

NOTE: Designed for use with a Sanyo Xacti Digital
VIdeo/Movie Camera, and may not support all HDMI-
CEC functions of other equipment.
Use the HDMI-CEC Function to enable or disable all
available CEC functions.
HDMI Power ON Sync and Power OFF Sync enable
specific features including the automatic power ON
process and power OFF process.
CEC
(Consumer Electronics Control)
The CEC feature allows the control of multiple
CEC-enabled devices with one remote control,
and the interaction of devices with each other
without user intervention.
For example, a CEC-enabled device hooked up
to your HDTV may be turned off by turning off
the TV set, or setting the device on stand-by
will set the HDTV on stand-by as well.
Xacti-LINK
With a Sanyo Xacti Digital Video/Movie
Camera hooked up to your HDTV's
HDMI input, setting the HDMI-CEC
Function to ON enables you the use of
keys on your GXDB universal remote to
operate your Xacti camera.
NOTE: The HDMI-CEC function of the Xacti must also be
turned ON to enable the Xacti-Link.
MOTION SYNC (120 Hz)
Your Sanyo 52" HDTV DP52449 has a refresh rate of
120 Hz, it basically means that it "redraws" the image
on the screen twice as often than a common 60 Hz
refresh rate TV would.
Full – Takes full advantage of your TV's refresh rate
capabilities for the best picture quality.
Theater – Best setting for original film movies
Off – Disables Full mode functions
NOTE: Even with Motion Sync set to Off, your HDTV still dis-
plays all images at a 120 Hz refesh rate.
18
Need help?
*DP52449 only
www.sanyoctv.com
(ONLY AVAILABLE ON DP52449 MODEL)
1-800-877-5032
HDMI LINKING SCREEN
GXDB XACTI-LINK KEYS
MOTION SYNC SCREEN