Sophos XGS 2100 Guide De Démarrage Rapide page 9

ENGLISH
7. Appliance LED codes
Status LEDs
Power 1 Green
Red
Power 2 Green
Red
SSD Blue
BP 1/2 Green
LEDs on each RJ45 Ethernet connector
ACT/LNK Green
(Left LED)
Speed Amber
(Right LED)
Green
8
Solid Power Supply 1 Active.
Solid Power Supply 1 Failure.
Solid Power Supply 2 Active.
Solid Power Supply 2 Failure.
Flashing SSD reading/writing data.
Solid Bypass mode on Ports 1/2 enabled.
Off Bypass mode on Ports 1/2 disabled and inactive.
Solid 1. The Ethernet port has established link.
2. Good connection between the Ethernet port and hub.
Flashing The adapter is sending or receiving network data.
Off 1. The adapter and switch are not receiving power.
2. No connection between both ends of network.
3. Network drivers have not been loaded or do not function correctly.
On If Ethernet port is operating at 1000 Mbps.
On If Ethernet port is operating at 100 Mbps.
Off If Ethernet port is operating at 10 Mbps.
Quick Start Guide XGS 2100/2300/3100/3300