Sophos XGS 2100 Guide De Démarrage Rapide page 10

LEDs on each SFP connector
ACT/LNK Green
LEDs on each SFP+ connector
ACT/LNK Green
Speed Blue
Amber
8. Support and Documentation
For more information and technical support, please visit
your local Sophos reseller.
Check our Getting Started resources to find out how you can get the most out of your purchase
www.sophos.com/get-started-firewall
Quick Start Guide XGS 2100/2300/3100/3300
Solid 1. The SFP connector is receiving power.
2. Good connection between the SFP port and hub.
Flashing The adapter is sending or receiving network data.
Off 1. The adapter and switch are not receiving power.
2. No connection between both ends of network.
3. Network drivers have not been loaded or do not function correctly.
Solid 1. The SFP+ connector is receiving power.
2. Good connection between the SFP+ port and hub.
Flashing The adapter is sending or receiving network data.
Off 1. The adapter and switch are not receiving power.
2. No connection between both ends of network.
3. Network drivers have not been loaded or do not function correctly.
On If SFP+ connector is operating at 10,000 Mbps.
On If SFP+ connector is operating at 1,000 Mbps.
Off Either the LED is not working or the SFP+ connector is operating at a speed below 1,000 Mbps.
www.sophos.com/en-us/support or contact
ENGLISH
9