Other Ports
Type
COM
RJ45/Micro USB
USB
USB 3.0 (Type A)
MGMT
RJ45 (10/100/1000 Mbps)
USB (rear)
USB 2.0 (Type A)
Module Slots
A
*
Compatible Modules
8 port GbE copper
8 port GbE SFP
4 port GbE copper – 2 Bypass groups
4 port 10 GbE SFP+
2 port GbE fiber (LC) Bypass + 4 port GbE SFP
4 port 2.5 GbE copper PoE
4 port GbE copper PoE + 4 port GbE copper
Quick Start Guide
XGS 2100/2300/3100/3300
Comment
You can connect a serial console to either the RJ45 or micro USB COM
port to access the CLI. Only one port can be used at any time. If both ports
are connected then the micro USB port will take precedence.
The required connection settings are:
Ì Bits per second: 38,400
Ì Data bits: 8
Ì Parity: N (none)
Ì Stop bits: 1
You can connect a USB 2.0 or 3.0 compatible device to this
port (e.g. USB thumb drive, UPS, 3G/4G dongles).
We recommend using this dedicated port to connect your Admin PC.
You can connect a USB 2.0 compatible device to this port (e.g. keyboard).
Type
Flexi Port
Comment
Can be used for any Flexi Port module listed in the table below
Comment
Flexi Port
Flexi Port
Flexi Port
Flexi Port
Flexi Port
Flexi Port
Flexi Port
ENGLISH
* SFP/SFP+ transceivers are sold separately
3