Technical Specification - Velleman CAMZWBLAH2N Notice D'emploi

4. Installation
• The yellow RCA connector is the video output. Connect it to the
video input of a supporting device (e.g. monitor, not incl.).
• The white RCA connector is the audio output. Connect it to the
audio input of a supporting device (e.g. monitor, not incl.)
• Connect the plug of the included power supply to the red jack of
the camera and plug the power adapter in the mains.
• To adjust focus, unscrew the small screw at the bottom of the
lens, turn the lens to adjust and re-secure the screw.

5. Technical Specification

pick-up element
number of pixels
viewing angle
min. illumination
interlace
resolution
video output level
power supply
weight
dimensions
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulted from (incorrect) use of this device.
For more info concerning this product, please visit our
website www.velleman.eu.
The information in this manual is subject to change without
prior notice.
24/02/2009
CAMZWBLAH2N
352(H) x 288(V) -CCIR- EIA: 320(H) X 240(V)
DC 9-12V / 40mA (regulated)(use PS1205R,
not incl.) or 9V battery (I-type, not incl.)
60 x 32 x 56mm
3
1/4" B/W CMOS
92°
0.1 Lux / F1.2
2:1
380 TV lines
1.0Vpp 75ohm
115g
®
Velleman