Connecting To A Power Source; Starting The Trimmer; Stopping The Trimmer - Toro 51248 Manuel De L'utilisateur

The blade under the guard is sharp and can cut
you. Be careful when handling the trimmer so
that you do not accidentally cut yourself.
4. Install the metal wire guide (model 51348 only).
B.
A.
m-6319
Operation
During operation, the trimmer may throw objects
in the operator's or a bystander's direction,
causing injury.
S
Wear safety goggles or other suitable eye
protection, long pants, and shoes while
operating the trimmer.
S
Keep bystanders away from the work area.
When the trimmer is running the cutting head is
spinning. If you contact the cutting line or cutting
head, you could be injured.
S
Keep the cutting head away from your hands,
feet, and bystanders. Keep the guard in place
and in working order.
S
Wear shoes and long pants when using the
trimmer.
S
Ensure that the cutting head has stopped and
you disconnect the trimmer from the power
source before you service or examine the
cutting head. Do not start the trimmer unless
your hands are on both handles and the
cutting head is down near the ground.
S
Do not allow the trimmer to cut into the cord.
4
Connecting to a Power
Source
If you do not fully seat the extension cord on the
inlet plug, the loose plug could lead to
overheating and cause a fire, possibly burning
you or others.
Ensure that you fully seat the cord on the plug
and use the cord lock feature to secure the cord.
m-6327
Important: Do not use a damaged cord.

Starting the Trimmer

To start the trimmer, squeeze the trigger.

Stopping the Trimmer

To stop the trimmer, release the trigger.
Trimming
3352-868
m-6317a
m-6412a
m-6316a