Normal And Prohibitted Use; Remaining Risks; Accoustic Emision Levels; Dust Extraction - Robland LBM Serie Mode D'emploi

Normal and prohibitted use

The machine is designed for the following work and is equiped with protective devices for these
processes only:
• mortising holes in all wood types
• mortising slot in solid wood, e.g. Sinking doorlocks, flush sinking of hardware
• mortising dowel holes, boring out knot holes, and making plugs for knot holes
It is not designed to work materials such as ferrous an non-ferrous metals, work different from that
stated below is prohibited

Remaining risks

• unintentional contact of the hands with the tools.
• workpiece kickback.
• tipping over of the workpiece due to insufficient support.
• ejection of knots etc.
• tool breakage or cutting edge breakage by overload
• cutting injuries, crushing injuries or danger of life due to fly away parts
• the health risks involved in this work by prolonged exposure to dust particles.
• deafness through prolonged exposure to noise.
The above does not negate the fact that extra safety equipment such as safety gloves and ear
protection must be used.

Accoustic emision levels

Measurements as per values according to EN ISO 7960:
The values given are the emission levels; these are not necessary the levels at which
the operator can work safely.
Alhough there is a link between the emission values and the exposion level, it cannot
be used in a reliable way to determine if supplementary measures should be taken.
Ear protection is recommended.

Dust extraction

For your oxwn health and to avoid fire risk and dust explosion, it is recommended to connect the
machine to a dust extraction system.
A 100 mm outlet is provided down the support column. It needs to be connected to a dust extractor
powerfull enough to obtain an airflow of at least 20 m/sec (at least 1500m³/h) measured at the outlet
of the machine.
36
Nederlands
stationairy load 67,9 Db (A)
working load 73,3 Db (A)
Français English Deutsch
V0815 LBM