AKASO V50X Mode D'emploi page 18

EN
12. Sharpness: Strong/Normal/Soft
Default setting is Normal.
Sharpness controls the quality of details captured in your video footage or photos.
13. Color: Natural/Black & White/Sepia
Default setting is Natural.
14. Photo Quality: Fine/Normal/Economy
Default setting is Fine.
System Settings
1. Sounds: Volume/Key Tone/Touch Tone/Boot Tone
You can adjust the volume of the camera and turn on/off key tone, touch tone or
boot tone.
2. Distortion Calibration: ON/OFF
Default setting is OFF.
Turn on Distortion Calibration, it can correct the image distortion.
3. Angle: 170°/140°/110°/70°
Default setting is 170°.
The angle refers to how much of the scene (measured in degrees) can be captured
through the camera lens. 170° angle captures the largest amount of the scene,
while 70° angle captures the least.
4. Diving Mode: ON/OFF
Default setting is OFF.
Turn on Diving Mode, it can compensate for the lack of red light in underwater
scenes. Diving Mode is designed to be used in tropical and blue water, optimized
for use between 10 and 80 feet.
16