AKASO V50X Mode D'emploi page 15

EN
12. Exposure Value: -2/-1.7/-1.5/-1.3/-1/-0.5/-0.3/0/+0.3/+0.5/+1/+1.3/+1.5/+1.7/+2
Default setting is 0.
By default, your camera uses the entire image to determine the appropriate
exposure level.
However, Exposure lets you select an area that you want the camera to prioritize
when determining exposure. This setting is particularly useful in shots where an
important region might otherwise be over- or underexposed.
13. ISO: Auto/100/200/400/800
Default setting is Auto.
ISO determines the camera's sensitivity to light, and creates a trade-off between
brightness and resulting image noise. Image noise refers to the degree of
graininess in the image. In low light, higher ISO values result in brighter images,
but with greater image noise. Lower values result in lower image noise, but darker
images.
14. White Balance: Auto/Tungsten/Fluorescent/Daylight/Cloudy/Dawn
Default setting is Auto.
White Balance lets you adjust the color temperature of videos and photos to
optimize for cool or warm lighting conditions.
15. Meter: Center/Average/Spot
Default setting is Average.
In photography, the metering mode refers to the way in which a camera
determines exposure. Cameras generally allow the user to select between center,
average or spot metering modes. The different metering modes allow the user to
select the most appropriate one for use in a variety of lighting conditions.
16. Color: Natural/Black & White/Sepia
Default setting is Natural.
13