JANE Matrix Light Mode D'emploi page 24

Choosing where to install the safety seat
Correctly choosing where to position the safety seat in the car
can reduce the risk of injury to the baby in the event of an
accident.
Reclining position, Group 0. The safety seat must be installed
cross-wise in the back seats. MATRIX LIGHT occupies two seats:
you can choose between a side and a middle seat, so an adult
can travel alongside, or completely in the middle. If you decide
on middle and side seats, place the MATRIX LIGHT so that the
head is as far as possible from the door.
24
Seated position, Group 0+. Whenever possible, install the safety seat
in the back seats. It is highly advisable that someone travels alongside
the baby to take care of them. Of the three back seats, the middle one
is the safest.
If you are travelling alone with your baby, it is a good idea to keep
them in sight without being distracted while driving. You can posi-
tion them in the passenger seat, providing it does NOT have an airbag
or the airbag IS DISCONNECTED. Do not be distracted for any reason
while driving: to take care of the baby, stop the car completely in a
safe place.