JANE Matrix Light Mode D'emploi page 23

1 Prior adjustments
Adjusting the height of the shoulder straps
For maximum protection the shoulder straps of the MATRIX LIGHT
safety seat should be adjusted to just above the baby's shoulders.
Check this height with the baby in the sitting or lying down position
in the safety seat.
The straps can be adjusted using a tightener so that the seat adjusts to
your baby during the whole stage of growth.
The MATRIX LIGHT safety seat has a quick shoulder strap height ad-
justment system, you just have to press a button and slide the ad-
justment mechanism along the backrest
MATRIX LIGHT has 6 different heights for the shoulder straps.
1a
There are two possible ways of changing the position:
1a.1 To change the position when lying down, pull the
plastic flap and slide the adjustment mechanism.
1a.2 To change the position when sitting down,
press the button on the backrest and slide it to the required po-
sition.
Release the button or flap and move the adjustment mechanism to
ton.
the nearest locking position, it should click into place. Check that it is
raps
locked by pulling the adjustment mechanism.
Changing the position of the handle
The carrying handle has 3 positions ( figure 1b ), each one of them has
a specific function:
Position 1: Hood folded. Does not have a lock.
Position 2: Carrying position. Position for installing the seat and taking
it off a JANÉ chassis and for carrying.
Position 3: AUTO position. For travelling in the car.
To change the position, press the double safety catch and then the
lever on the handle and turn the handle to the required position.
CAUTION Check and adjust the height and length of the
shoulder straps as the baby grows.
23