Additional Base Unit; General Settings; How To Add A Base Unit - Geemarc Ampli DECT300 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ADDITIONAL BASE UNIT

1 - GENERAL SETTINGS

A second base unit can be connected to the network in order to extend the
range of the handsets. When an other base unit is registered to a handset, it
can automatically search for the next base unit if you go outside the range of
the first base unit. The transfer between base units is handled automatically,
although this cannot be done whilst a call is in progress. Handset will keep its
connection with one of the base units until it loses connection due to having
moved out of range. In this case, the handset searches for a new base unit in
its registration list.
The base units coverage areas must overlap to ensure there are no gaps in the
coverage. Otherwise the radio connection will be lost.

2 - HOW TO ADD A BASE UNIT

1 - Connect the additional base on the network phone socket.
2 - Plug in the adaptor.
3 - Register the handset to the base unit as described before.
Remark: The first registered handset has priority on the first base. It will be
activated when the handset will move to the second base (move to the new
radio range).
To check if your handset or all handsets registered to this base are registered
simply press the page button
on the new base, all new handsets
registered to this base will ring.
IMPORTANT: If you connect several bases together, the handsets
registered to the additional bases will ring for a few seconds during an
incoming call even if you take the line with one of the first base handsets.
27

Publicité

Chapitres

Table des Matières
loading

Table des Matières