CLAS DM 2000 Mode D'emploi page 16

DM 2000
Connect the air hose of the air compressor with the tie-in of the separator.
The operating pressure of this machine should be 8-10bar (110-140Psi), the machine can work well within such
operating
pressure, if it is lower than 8bar(110Psi) the strength for the grip and bead break for turntable will be not enough
for some kind of tyres and even it can not operate the tyres.
Check if the reading on the pressure gauge that locates on the separator meet the demand of pressure setting
reading, if not so, check if there is some problems on the hose or air-compressor.
• Never place leg between the bead breaker blade and bead breaker rubber, so as to avoid stepping the wrong
pedal and injury the operator.
• Never place hand on the tyre when the demount head is on the working position, so as to avoid the injury of
the operator.
• Never place your hand between the tyre and gripping device when operate the rim, so as to avoid the injury
of the operator.
• The jaws should be in closed position when do the bead break, so as to avoid the injury of the operator.
• The operator should wear the protection glasses when in ate the tyres with the machine with GT system, so as
to avoid something blow into the eyes.
• Never put the hand between the rim and tyre when in ate the tyre, so as to avoid the injury of the operator.
• There should be nobody behind the tilting post, when the machine is on the working position.
16
AUTOMATIC TYRE CHANGER 13"-28" WITH HELPER ARM
WARNING