STERWINS ELM2-36P-3W.4 Notice De Montage page 211

SAFETY INSTRUCTIONS
Switch on the motor carefully according to instructions and
with feet well away from the blade(s).
Do not tilt the machine when switching on the motor, except
if the machine has to be tilted for starting. In this case, do
not tilt it more than absolutely necessary and lift only the
part, which is away from the operator.
Do not start the machine when standing in front of the
discharge opening.
Do not put hands or feet near or under rotating parts.
Keep clear of the discharge opening at all times.
Do not transport the machine while the power source is
running.
Stop the machine, and remove the disabling device. Make
sure that all moving parts have come to a complete stop
whenever you leave the machine, before clearing blockages
or unclogging chute, before checking, cleaning or working
on the machine, after striking a foreign object.
Inspect the machine for damage and make repairs before
restarting and operating the machine; if the machine starts
to vibrate abnormally (check immediately), inspect for
damage, replace or repair any damaged parts, check for and
tighten any loose parts.
Pull the plug from the socket:
- Whenever you leave the machine;
- Before clearing a blockage;
- Before checking, cleaning or working on the appliance; after
striking a foreign object. Inspect the appliance for damage
and make repairs as necessary; if the appliance starts to
vibrate abnormally (check immediately)
Keep all nuts, bolts, and screws tight to be sure the appliance
211 211
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN