Aiwa XP-MP3 Mode D'emploi page 13

3 Press PRGM/ENTER/DISPLAY
within 4 seconds.
If it is not pressed within 4 seconds, the
track number changes to 00. Repeat the
procedure from step 2 again.
PRGM / ENTER /
DISPLAY
4 Repeat steps 2 and 3 to program
more tracks.
5 Press ePLAY/PAUSE to start
program play.
To stop program play
Press sSTOP/OFF/CHARGE.
To add tracks to the program
Repeat steps 2 and 3 before while in standby
mode. You can add tracks to the end of the
program.
To erase the program
Press s STOP/OFF/CHARGE while in
standby mode.
Note
• The program is also erased when the disc
compartment is opened or the auto power
off function turns power off.
• When the 24 tracks are programmed,
"PROG-FULL" appears, and no more tracks
may be added.
• You cannot back to previous track by
holding r pressed during program play.
• Repeat play and random play can be
performed during program play.
13
ENGLISH