Dreame T10 Manuel D'utilisation page 19

Care & Maintenance
Cleaning the Multi-Brush Bar
1. Turn the lock counterclockwise until it
stops, then remove the roller brush from
the brush bar.
3. When it is dirty, rinse the roller brush
with clean water until it is clean.
2. Use scissor to cut off the hairs and fibers
that get stuck on the brush bar head. Wipe
the dust from the notch and transparent
cover with a dry cloth or paper towel.
Thoroughly dry before use.
4. Stand the roller brush upright for at least
24 hours until it is fully dry.
EN
12
11 1
10 2
24 hrs
9 3
8 4
7 5
6
17