KENMORE ELITE 318205601A Manuel D'utilisation Et D'entretien page 11

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Setting Cooktop Control
Power Sharing
In order to give you more flexibility, your induction cooktop
is equipped with more cooking zones than the number of
induction generators. Each of those generators is assigned to
power a specific cooking zone (Fig. 25). One or two cooking
zones are assigned to each generator. To be able to give you
access to the highest power ratings, the generator will focus
its power onto only one cooking zone. If you use more than
one cooking zone at high power on the same generator, the
generator will need to share its power to both cooking zones,
thus lowering the power level of one of the cooking zones.
When you are sharing power (cooking in both zones), the last
zone set will cook at the power setting you selected. The other
zone will experience a slight decrease from its power setting
if both zones are set high enough.
Depending on the size of your cooktop, 2 or 3 sections are
available:
The 30" cooktop is equipped with 4 cooking zones within
2 sections.
The 36" cooktop is equipped with five cooking zones within
3 sections. Note that on the 36" cooktop the right cooking
zone has its own section and will not share its power.
To get the highest power output from your cooking zones, cook
with only one cookware per heating section. If you need to use
most of your cooking zones at once, start your cooking process
on only one cooking zone within the heating section and then
add your second cookware on the second cooking zone when
the first one has already reached its cooking temperature.
Remember to select the power setting last for the cooking zone
you want to maintain at full power or set the altered power
to where you want it.
2 Induction Generators
Cooking Zones
3 Induction Generators
30" model
36" model
Fig. 25
Operational Noises
The electronics generating the induction fields are pretty
much noiseless but they do produce heat at high power level.
A soft-sounding cooling fan activates when the unit is running
multiple cooking zones at once or when a cooking zone is set
at very high power settings.
The buzzing sound you could hear from your cooktop is not
coming from the electronics but from the cookware you are
using. Here are some causes of this noise:
Most induction-ready cookware are made of several layers
of materials. An encapsulated steel layer is usually used to
harness the induction field and transform it into heat, which
is then transferred to the other materials by radiant energy.
The induction field will cause the steel layer to vibrate
against the other materials in which it is encapsulated.
This is the most common cause of noise from the induction
process. This buzzing only happens at the higher power level
settings. Note that high quality cookware manufacturers
weld this steel layer in place which lowers or cancel this
noise.
Light weight cookware may also vibrate. We recommend
using heavy weight quality cookware.
Cookware with warped bottoms can vibrate on the ceramic
glass surface at high power settings
The power output of your induction cooktop
is capable of warping an empty pan. Never use the higher
power settings on an empty pan. Even the highest quality
cookware is vulnerable to warping.
Riveted handles on cookware can also cause buzzing
sounds from the vibrations.
Solid cast iron and enamelware cookware should not emit
any noise. Top quality cookware made of several layers
should also be relatively quiet.
11

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

1010

Table des Matières