Washing Clothes; Signal Function - Proline FP 612 W FP 612 WE Manuel D'utilisation

GB

Washing Clothes

1.Open the door to load the articles into the drum.
DO NOT OVERLOAD the appliance or your laundry may not be washed properly.
Please refer to the chart below to determine the load capacity for the type of
laundry you are washing.
2.Close the door.
3.Put the detergent and, if required, softener or pre-wash detergent, in the appropriate compartments.
4.Turn the water supply on.
5.Turn the programme selection knob to select the desired programme.
6.Press and the appliance will begin the cycle.
7.When the cycle is finished, the appliance will sound.
8.Open the door and remove the laundry.

Signal function

You can use this function to turn on or off the sound made when pressing the buttons or turning the
programme selection knob.
Prélavage
Press and hold
indicate the signal function is activated.To deactivate this function, press and hold
Prélavage
again for about 3 seconds until a beep is heard.
Fabric Type Load Capacity
Cotton
Synthetic
for about 3 seconds until a beep is heard
6 kg
3 kg
31